Blckshdw
Moderator 50 From Tampa Bay Area, FL
Latest Activity Postings About
-
-
Well, with respect to the ignition switch, the verdict is in--I hope. The photo below shows the switch I just removed on the left, the Dorman version, and on the right is the one I had removed a... -
New OE Oil pressure sensor to replace the one that is leaking.
-
Blckshdw reacted to krunal88's post in the thread What did you do to your GMT today? [Part II] with
Like.
Put some grease on the slip yoke today on the TB. Had the occasional thud/clunk when stopping and take off. Let’s see how it goes. -
Blckshdw reacted to azswiss's post in the thread What did you do to your GMT today? [Part II] with Like.
What I will be doing to my GMT this weekend . . . looking into a "Low Oil Pressure" warning I got last night. Pulled into a parking lot immediately and shut off the engine. Checked the dipstick...
-
Blckshdw reacted to northcreek's post in the thread What did you do to your GMT today? [Part II] with
Haha.
001 - KANDEFER, MICHAUser: Mick You're well on your way to a Mad Max Mobile...:thumbsup: -
Blckshdw reacted to Mooseman's post in the thread What did you do to your GMT today? [Part II] with Like.
Friday I did the cooler line. It was the part that holds the little clip that holds the lines together that corroded. I just cut off the joint and patched it with hose and clips. I couldn't put...
-
Blckshdw reacted to Mooseman's post in the thread What did you do to your GMT today? [Part II] with
Wow.
Guess what I'm doing this weekend? And the funny thing is, it happened near the same spot that it last happened with my '02 back in 2014. This time it's likely a rusted out line. Just waiting... -
W...T...F...
-
No pictures yet but we picked up our new to us 2020 Ram 1500 classic today. Runs pretty slick. My daughter is beyond the moon happy but more importantly, she is learning that with hard work you...
-
Pool temp is up to 75F today, usually in the low-mid 60's this time of year. Usually not ready to jump in until late April!
-
A Big "Thank You" to everyone for all the helpful advice. I finally buttoned things up yesterday. New A.C. Delco water pump. New Premium Radiator from Advanced Auto (fit perfectly). New...
-
Thanks Blckshdw for the info. I tried this a few days ago. One of the tabs broke on my spring clamp and left me no way to loosen it. I ended up having to pull the alternator and grind the...
-
Thank you all for the input. Special thanks to Matt and Mooseman for the retaining chain to the engine hoist bracket tip. That, along with my new $19.00 Harbor Freight Adjustable wrench, and a...
-
Blckshdw replied to the thread Replacing lower radiator hose question..When I had to change my t-stat, I removed the wheel, and went through the wheel well. Bit of a tight squeeze for someone tall with long arms, but I managed. Plus it was MUCH easier on my back...
-
-
Blckshdw reacted to Mooseman's post in the thread Any special purging of air needed after replacing water pump? with Like.
And if you want to get a little fancy, get one of these funnels. Makes the filling and burping process much easier and less messy. https://www.amazon.com/dp/B0BJDJG289/?tag=gmtnation-20
-
Well boys, hope everyone is doing well and surviving the winter. Hoping we just got past the worst of winter (knock on wood). We were floating -30one week, melting the next and flip flopping all...
-
The new cam arrived and I got it installed over the weekend in 13.5 hours total. The supercharger really complicated things, especially on the passenger side. I only took a few pictures this time...
-
While I'm in this holding pattern waiting for the new cam to arrive, I went ahead and installed a Magnaflow catback part number 16656. I had a local shop weld in an O2 bung for a wideband...
-
Nothing much. Finished my block of shifts at work. We switched things around so I was home before dark. Its a bit cold but much better than anticipated, so, that means a sled ride. The new...
-
Blckshdw reacted to flyboy2610's post in the thread What did you do to your GMT today? [Part II] with Like.
The low beam on the passenger side of the wife's '06 TB wouldn't work. Replaced the bulb, all seemed well. Tried it the next day. Nothing, Gave the headlight a little love tap, the low beam came...
-
Another day, another tire repair. This time it is a 4mm hex key in one of the jeep tires.
-
Blckshdw reacted to TollKeeper's post in the thread What did you do to your GMT today? [Part II] with Like.
Bought a Trickle Charger to mount under the hood since its a spare vehicle. Just need to get it installed.
-
Blckshdw reacted to krunal88's post in the thread What did you do to your GMT today? [Part II] with Like.
Replaced the master cylinder with an AC Delco unit from RockAuto (thanks as always for the coupon codes) on the TB. Bench bled the cylinder and all 4 calipers and what a difference! Pedal doesn’t...
-
Blckshdw replied to the thread How To: Replace Burnt Out Window Switch Lights on 02-05 Envoy.The plungers are loose, they will just fall out if you turn the module over once the case is open. They provide the mechanical connection between pressing the switches, and the blue rubber...
-
Blckshdw reacted to xavierny25's post in the thread What did you do to your GMT today? [Part II] with
Love.
I may have 1 or 2 laying around somewhere. Once I find them I'll message you for a mailing address.
-
-
Loading…
-
Loading…
