Recent content by bassman

There is a ground point on the pillar between the two doors. The plastic covers just snap on. Pull the ones off the carpet first. If the ground is OK, try unpluging the seat module and see if that clears the lights.

Great if it has the display (DIC) Message a price and maybe a picture when you get it. Thanks

Radio fixed. Cleaned and tightened grounds on right side of console. Wish I had a good instrument panel to switch with to verify DIC. I think that is the only problem.

Do you still have he instrument panel? Picture and price shipped please. 72638

Its been a while and I don't know if you found your problem yet. Do not unplug engine computer from your body computer as it won't start. You can unplug any seat modules or door modules one at a time and if it corrects your problem, you have located the area where your problem originates.

Doesn't look like they found a solution yet. I think it could be a loose connection somewhere. When it gets warm, you get expanison and it makes. That means it could be ANYWHERE. I do know that from my earlier problem that the BCM was turning the radio off and if I have a data line problem...

It does get cold sometimes. 19 degrees last night but I had this problem in the upper 40's. I tried the fuse reset with no luck. So I pulled the instrument panel and checked all diodes, resisters and transisters. All were OK. I can't check the IC's. Put everything back together and now I have...

Totally dark or off. I can't remember if I have tried pulling that fuse but I will try tomorrow. Its real disappointing after all the time I put in researching and tracing and then loose the display. I'll let you know what happens. Thanks

Sorry because of the length but I have searched for answers and maybe can answer some questions for others and find some for me. First the problems. 1. I lost speedometer and fuel gauge. 2. Vehicle would not start without trying several times. Fuses were OK. Starter OK. Battery good. 3. At...