Recent content by cretecrawler

Oh wow I have one of these testers. So I an assuming that you feel this is an electrical issue rather than a mechanical one

06 envoy denali, a couple of days ago the key started not being able to rotate to the off position but the key itself was able to be removed in the acc position. Which indicated to me that the tumbler had expired, so I changed it out. But to my dismay the problem still is present short of the...

The close up of broken wire

I pulled my old fuse box out and studied it and found the broken wire that caused the original occurrence a half dozen years ago when I replaced it with a dealer supplied one. Then pulled the one out of the truck and the exact same break in the exact same spot had occurred. Couldn't find 20g...

I am remembering that this exact issue happened to this exact truck many years ago. I replaced the fuse box then and it did fix the problem. I was thinking it was the previous 02 4.2 envoy that one had but looking back in my spare parts I found the original box and it is the part number for this...

I do remember that issue

So I was just able to get it to start again and ran another reading and it says:

https://www.amazon.com/dp/B014CT4M3K/?tag=gmtnation-20 Would this be worthy enough?

The only reason I mentioned Jeepers was because pouring water seemed to work twice on the tps. Once I would assume a fluke but it worked twice so I thought it was worth the mention. That's not so great news about the tech 2 or above scanner since I don't have access to one. I did remove the...

2006 envoy denali with 2001 5.3l LM7. Have had issues with not always starting on the first turn but usually always on the second one. Was told that it most likely was the cam position sensor as I put in a non ac delco unit. So I guessed it finally failed. So I changed it out with a Standard...

I now have one of these in place of the paperclip https://www.amazon.com/dp/B0D1VDWTBX/?tag=gmtnation-20

Ty I have had so much on my mind that I forgot about that. Please tell me how to resolve this. These are the codes I have now

Yes the pressures were correct a couple days ago. I took it to a guy and he checked over the repairs i.e. the low and high pressure switches, the pressures after the jumper was engaged and the cooling effect in the vehicles interior. He noted that the compressor was making a little noise and...

Sorry 30 to 87 unfortunately I closed the hood and forgot it being hooked up and it drained the battery