Recent content by dmanns67

Hopefully you took that pic with a poor quality camera or you wasted $90 as that output is horrible. For testing purposes, I would go with the cheaper LED kit if you do not think the larger heat sink will be an issue. Hopefully you do not end up with similar output results as you seen with...

Well past voting time :yes:

Welcome :tiphat:

Welcome! :tiphat:

Unfortunately, the harness I received did not work on the F150. Its designed to work through the factory CD changer and even though the head unit was CD changer capable, once I tore the dash apart, there was no factory CD changer data cable. Had to go to plan B, a FM Modulator. Much better...

Never purchased a pad. I unhooked the battery and removed the three harness connectors from the PCM. Wrapped it in bubble wrap, put in a box, and took it to UPS for shipping. Here is some info from PCMofNC. http://pcmofnc.com/install/Chevy Trailblazer 4.2l I6 Installation Manual 2002-2009.pdf

Just to add to what Mounce said, the easiest way to see posts that you have already viewed is to click on "Recent Content" In the main header. That will bring up every thread even if you have already viewed the thread.

When I got my tune during their Memorial Day sale, the transaction had to be completed prior to the end of the sale. I made the purchase on the last day of the sale and I shipped out my PCM the following week after the sale was already over. Just had to wait for my vacation to start since I...

:iagree: with Carlton. The lens of the projector that I put into my fog lights is sitting right against the lens of the fog light as you can see in the pic. Even after driving for 45-60 min with the fog lights on, the lens of the fog light is only slightly warm to the touch. No melting or...

Congrats Don, awesome pic. Definitely a hard one to beat.

Trust me, once you do the interior light LED conversion, it will not be long until you want all of the exterior lights changed out for LEDs. Splicing in a 6ohm 50w resistor into the turn signals is pretty simple. If you can handle doing a LED conversion on the cluster, everything else is a...

The interior lights can be replaced with LEDs, all plug and play. The license plate lights, reverse lights, mirror turn signals, vanity lights, and front side marker lights are all LED plug and play as well. The front main turn signals and rear turn signals are plug and play for LEDs, but you...

All of the aftermarket projector headlights on EBay/Amazon for the TB use halogen projectors. Output is much worse when you install a HID into the halogen projector. The HID bulb itself causes shadows/dark spots because the reflector bowl of the projector is designed for a halogen bulb...

How is your HID bulb coming loose? I ran HIDs in the stock housing with three different aftermarket brands and never had that issue. Are you using the rubber washer that goes in between the HID base and housing? If not, I can see how the HID could vibrate loose over time. The only issue I...

Knock on wood, I have not had to mess with the TB other than replacing a HVAC actuator. The wife has been wanting a Bluetooth car kit to stream music/talk for the F150, but the factory radio does not have an auxiliary port. I finally found a company in Kissimmee, FL that sells auxiliary port...