Recent content by eutechnyx

I just sent him a text and called but nobody picked up.

I have a question that I should probably ask DJM but I was unsure of their technical support knowledge. Long story short, my truck is bagged and lays frame. It gets close to 18 degrees of camber up front when laid out, but I can lift to almost stock ride height which eliminates camber when...

I'll send you a pm.

These are 24x9.5 +38 offset to tuck on an envoy/trailblazer. Price is $600 shipped, I will cover shipping to anywhere in the US. Tires are NOT included in the price. PM me here or text me 4072834415.

Got the system vacuumed and pressurized today with no sign of a leak. So we filled the system with freon and some dye detector and will keep an eye on it. I have a hissing sound right around the accumulator area similar to what Carlton described so I'm going to keep an eye on that, only makes...

I hope so too man, I think mine was cause by me yanking on the ac line near where I had to pull the alternator out to get the thermostat housing out recently. I was pulling and bending that line.

I am having a guy local to me vacuum the system, pressurize the system and find the leak. I guess once the leak is found then I'll replace the orifice tube and accumulator. He told me I shouldn't of caused any damage at all by the charging the system and running it for a few minutes hopefully he...

So, checked the pressures with truck off and they were zero high and low side. Added some freon with oil (can upside down so the oil got in the system) and got the compressor to kick on and off every 5 seconds. I uploaded two pictures to show the pressures with the ac compressor off. It kept...

I actually found a friend with some gauges, the low pressure port is on the actual dryer itself it looks like right? High pressure is on the line?

So, it's 120 degrees but after work today I figured easy test was check all fuses, they all look fine and I swapped the ac relay around with another relay and still no ac. I couldn't get under the truck today to try to tap on the front of the compressor as suggested but I'll try that next. The...

Well that seems like a quick test, I just want to work from the cheapest option to the most expensive if possible. So I'll give that a shot, I never really suspected the clutch itself since it never made any noise or acted up at all.

Ac has worked fine for the past 5 years, I was told by the previous owner that he re charged the system before I bought it (could mean it has a very slight leak, again that was 5 years ago). To give background on the vehicle the last thing I did was replace the Engine coolant temp sensor and...

I'm confused, it says 2006-2009 also fits GMC Envoy. What did they change from the earlier models that does not allow them to fit an 03?

Ok buddy I'll let you know. Lets see how this sponsorship goes and see what they want to offer me. Worse case I'll be going for SSBC next. I'll never EVER need the benefits from a 6 piston caliper but they sure do look good behind the wheel lol.

I thought I saw mention of front and rear brackets, I'd assume there is no way the factory front brackets would accommodate 6 piston calipers but I could be wrong.