Recent content by j-bone

hi i realize this thread is old but I found it useful going to try and calibrate mine tomorrow as ive been chasing my tail for a few months . it wouldn't pump up leaving it ridding on bump stops and on the rare occasion it did pump up it would go all the way up to maximum. the sensors don't...

Hmmm I may have skimmed the prompt screen and missed that but I was on the highway for most of the test . I’ll report back when I try the test again . The first part of the test was in park and keep between 1800-2200 rpm which passed .

I'm adding some follow up information to those who find this thread for help . first off those who have a tech 2 close please see the following post before starting the test https://gmtnation.com/forums/threads/fix-tech-2-reboots-if-engine-started.16563/#post-583460 second the test needs to do...

mooseman for the win! I ran into this problem tonight while trying to run evap test . for anyone looking to solve this problem I would suggest doing what mooseman did or as I did which was to have a battery on the passenger side ( I had a small lawn tractor battery ) and disconnect the fuse and...

you are correct , its called evap service bay test , thought that was the function to close the purge valve for smoke test . Found it here , along with the some other very useful info https://srs20assets.service-solutions.com/Media/OEM/GM/en-US/Generic/Downloads/Document%20Library/April2002.pdf

Bringing this back from the dead .... does anyone know where / how to force readiness with the tech 2?

pulled it apart this morning and there is black soot inside the lcd display , she let the smoke out . off to a dash repair service . still having a stabil trak issue but need more time and data to narrow that down. I suspect a bad steering angle sensor but I can't find steering data with the...

pulled back the rubber boot for the tailgate and the wires were broke clean , soldered in new wires for the tailgate and everything works . on to the dash , found a thread on the old site pulled the dash and removed the back cover plugged it in and it worked snapped the tabs on one by one and it...

started pinning out connectors today , regarding the tailgate module . have battery voltage at module checked the data wire and between the module and a splice pack under the rear passenger seat I have no continuity. this is my first time seeing a " splice pack " looks like all wires get...

The DIC is listed as instrimant pannel / DIC will check. yes my next step is to start pinning out connections. just looking for some information how the system operates to get a starting point .

you just like saying dic fuse ?:rotfl: i'm guess is more local to the dash the other stuff though after digging a little into how the system works looks like the driver door module is the master and the rest are slaves to it so the tailgate might not be getting signal as well as other door...

After doing some more investigating, As stated the rear tailgate has no life ( no wiper / washer and wont lock ) using tech 2 it says no communication with module check the fuse labeled lift gate module and driver seat module and good ( seat works normal) checked the boot at rear hatch for...

Yes I agree that if all wheels read the same but are off to actual vehicle speed the abs system is happy . If other have this non zero condition and abs is working correctly then I’m ok with that . Upon further reflection on yesterday, the front left hub had more resistance then the right ...

first off i never said what vehicle this is:bonk:, 2006 buck ranier AWD V8 Ok so some updates and more information on the whole scope of problems i'm chasing and why I think its something more then a sensor. first an update on the sensors , curiosity go the best of me and decided to probe the...

Yeah sorry I didn’t mean to sound arogent , I understand you can’t know the skill set on the other end of the forum . I take everything with a gain of salt no matter the source.