Recent content by Morgoth604

thanks for the pictures. id say if you have steady hands and a solder gun and solder try and resolder the pice back on. but id remove all the old solder off and then resolder it back together.if you dont have any of that then you next best thing would be to go to a junk yard and get a new one...

i was doing sum thinkingn regarding that slider. are you able to post a picture so i can see it? but with out me seeing it all i can say is maybe sum epoxy unless its meatl then id recommend going to lordco or an auto parts store and see if they have any liquid steel. it comes in a small tube...

if its -21 outside right now then yeah yeah thats normalfor it to be a bit cold for the first 100 meters or so. keep in mind our trucks use the heat from the engine to give you hot air. so as you drive the engine gets hotter which in turn will give you hotter air for the system. after the first...

actually i do. the front is controld by the computer telling the tranfercase how much tourqe is put to the front wheels and applyies the torque by controlling the clutches to aply pressure to the clutchs locking the front and allowing the front to pull. as more power is applyed the more the...

if you have foud an 8.6 rear end, and you have an 8.0 right now, then yes i would upgrade to the 8.6 and id get the e locker from eaton. it is a great locker from all the reviews and people at eaton and others. if you have the abs sensor then make sure tyhe new rear has the abs sensor and youd...

thanks i know there just a straight swap, out with the old and in with the new. as for the abs sensor the earlyier years like mine which is a 2002 dont have the sensor on the rear end. the sensors for the abs are on the front so that will not be a problem. the shop that fixed my truck went...

i was wondering how much you paid for the wheel spacers, and where did you get them and if they are 6x5 or are they an upgrade from 6x5 to 6x5.5?:undecided:

so your saying that if i swap out my 8 inch rear end that is on the truck now, and install the 8.5 inch from the extended wheel base version, it should match up perfect with the suspension?. so i would not have to replace the panard bar and trailing arms. your saying it would be literally a...

yup your abosolutly correct. i double checked with my mechanic, and he siad ihave the 8inch rear end. sucks casue that would be the best locker for our applications i think.because our 4wd drive swtich in the cabin above the rear window wiper only controls the front end diff and the transfer...

ok so i went to get my rear diff fluid changed and the guy said there is a leak coming from where the drive shaft goes into the rear diff. i know its just a bearing seal leak. but its been a while and i just asked to service the whole rear diff and replace the broken parts and clean out the...

hello there i have one question reagrding your reary sway bar delete. what are the pros and cons of you removing the rear sway bar? :smile:

no no im not trying to double the capcity if i was id just use a lage capactor for my subs. i want to run on the secondary battery because i use the radio alot when im camping and if i isoltae the secondary battery from the main battery the isolator will charge the main battery first then the...

no its not because of the subs and amp. i want to have the stock radio and amp and my whinch all running off the secondary battery because i do a lot of off roading and camping and i want to keep those heavy power accessory's seperate from my starting battery. i know i have to isolate them, im...

have you tryed having sumone put the truck in drive while you watch the engine and then put it back into nutral. the engine may move back and fourth if the motor mounts are going or have have gone bad. if the engine doesnt move significantly then id say clean your plugs and coils really good...

2002 trailblazer ltz, 4wd. i have the bose premium enhanced deck with the lux amp in the rear passanger coner pannel. it has onstar aswell. (and no the onstar isnt activated.) what i want to do is run the stock deck off a secondary battery. so that the main battery is for the computer and to...