Recent content by unico13

Yes! they are...

Good day! Just double check my rear fuses as well in the front ( thingking theres a fuse connected to the steering wheel).:biggrin: But they are all good,. Now Im getting frustrated,. maybe I will just put back my steering wheel control without lights,. Coz I put the old bulb which is not...

Thank you sir! I did put everything in place the first time I change all the bulbs to LED( using the polarity info from trailvoy) and it didnt worked. So I pull them out again and reverse all the polarity., and put them back again and I got same result., that why I decided to take them from...

Thanks Sir the roadie I believed I can tell wheres the anode and cathode of an LED..:smile: I will check my rear fuse box,.

relieved!!! now I know Im not the only one..:smile: maybe we can help each other out!!:smile:

Thank you for your input sir! May I know in your case is your buttons working and your lights are not? or both not working? Cause in my case the buttons are working but not lighting,. If we have the same problem,In that case I have to change my clockspring, which is I dont know how,and have...

Thank you for input Sir! As I said I made this polarity in my steering whell and it doesnt work,.Im hoping that my truck is the same wiring as everyone here,.:frown:

Thank you for reply! Just came from work,.I will post a video of how the jumper thing works,. and I tried flip the LED's but what I noticed are they are not lighting and even Im doing the jumper thing..

so this are my polarity right now.. As I understand to your suggestion sir I have to reverse one of them? or should I reverse them all?:smile: For the jumper Im putting the + of the Extra led to the first pin from the bottom and anywhere for - of the led.

thank you for helping me out.. I did the trick to all of them and I have the same results,. I Also tried moving them around but I can only swap the bottom buttons coz the upper buttons have different pins 5pins on right and 6 pins on left,. And all the leds light up when Im doing the trick,. So...

Thank you for your reply Sir Blckshdw!!! No its the same Leds, what I just tried to do from the picture is to have jumper,. As you can see in 2nd picture if I put the Led or I can put any conductor to the + and - of the circuit the steering wheel control lights up,. But you cant control/dimmer...

Greetings to all!:biggrin: Just wanna know If anyone's here experienced what happened to me? So I decided to put led on my steering wheel control after they burned out.. when i put my led and its not working after following the polarity what Ive seen to our site. I pull out one of the led and...

hooray!!!:wootwoot: After being busy from work and some personal things, I have now time to visit this AWESOME site.. Shout out for MAY03LT!!! Just want to thank you for your help. For wiring and PM's..:thumbsup: Until now My Remote car starter works perfectly.. If you want pictures i can...

Thank you very much SIR MAY03LT I am good,and how bout you? As I post my wiring diagram I dont know if thats help to determine where they going,.:confused: In 6 pins *pink&white the default setting is IGN#2 In 12 PINS *WHITE(-500mA/+10Amps)= GOING TO PARKING LIGHTS *RED&BLACK= PARKING LIGHT...

Hello everyone,!!I spend two days reviewing all the installation guide we have here..( blazinlow89 thread and awer25 in trailvoy.) and I read all the reply of great MAY03LT.. But I have connections that I dont know where to connect.. :) Hope you guys can help me., I know its easy to bring it to...