Recent content by vansmack2

Well there are many things that can cause these codes. I saw a youtube video where I guy had change the purge valve, vent, valve and canister, had a smoke test done and no leaks. He said after he changed his fuel tank pressure sensor on his TB that fixed the problem. I think that is the case...

I was getting P0440 codes even after replacing the purge valve, vent valve and charcoal canister. I replaced them all, because I have over 270,000 miles, and had to replace my transmission anyway. New transmission is working fine, but I was still getting the P0440 error. I finally replaced the...

Yes, and I think I posted that earlier, but if not I replaced both the camshaft position sensor on the front of the engine, and the vvt sensor behind the power steering pump. Since I have to do the big job of taking the engine apart I am going to replace the timing chain, etc. as I stated...

Well, I am going to replace the chain, guides, tensioner, all 3 sprockets (one is the cam phaser sprocket), etc., everything in there. I have a little over 270k on my TB, so I will just do it all. Parts are on order from Rock Auto. Melling timing chain set, and GM gaskets. Other than those damn...

Yes. I have an 02 TB with the blue o-ring and about 270k miles on it. I was getting that dreaded low oil pressure, and verified with a test gauge that it was low. I dropped the oil pan, took out the pickup tube, and while cleaning it the hard o-ring fell apart. I already had the new o-ring, so I...

Mike did you get the ABS light thing fixed? It is often caused by corrosion around the speed sensors. I had that problem on my 2002 TB. I took the two front speed sensors out, cleaned all the rust off, re-installed them, and the problem was gone.

I am going to change my timing chain, and timing sprockets on my 2002 Trailblazer soon, so I bought a few tools for the job.