Recent content by rcfiddy1

I agree something probably mechanical. First thing I did was put graphite on key before I did ignition switch.

Thanks anyway. Seems like all info regarding that anti theft says it prevents the ignition key from turning off. I was able to turn off the key and remove it. Which makes me wonder what it could be. :hissyfit:

Yes, I see the button but it does nothing to allow my to turn ignition key to run position.

Yes. Did that this morning but than realized the key still would not start.

I got the broken key out but the spare key won't turn in the cylinder either. So I am still stuck with truck in park, key in off position and no way of turning cylinder to run to remove old cylinder.

Well as of now I will be replacing the cylinder since I broke the key off in it. Any ideas how to get the cylinder out. I know you need to turn it to run and push the pin from top down. Is drilling my only option to get it to turn?

Ok, but, my issue is the truck shut off perfectly fine and removed the key with no issue but the next day the key went in but I can not turn the key to acc or run.

Any follow up? Mine won't turn at all. Replace ignition switch but still the key won't turn.

Decided to give the ole TB some luvin.

Yes the rubber lines to the calipers have been replaced when the calipers were done. Let me also say I have no codes popping up and I just tested the ABS on some ice and its working fine.

Hey all, I have searched thru a few posts regarding front calipers stickig and uneven pad wear but I have a issue I cant seem to get resolved. My 02 LS was due for rotors and pads. I swapped them out and all seemed great for about 2k miles than I had my master cylinder fail. Pedal went to the...

Know people say our TBs brakes are a bit spongy but we have 3 TBs in the family and all 3 had great brake pedal feel till mine developed a problem. I had my pedal go to the floor so I started replacing pads, rotors, fluid, and master cylinder. The truck will stop but not in a predictable manner...

Just took off the spare tire.PITA! Replaced it with new size.

New pioneer avic 140bh installed and working great.

Nice :raspberry: