Bumper Step Plates are now a GO with 2 versions

[DFWWIZ]

I finally found a CNC shop to make 2 versions of the aluminum rear step plate. One with lines and SS and one with lines "only" across the plate. I'm getting 50 done for now and will soon have them in hand to do the powdercoating and/or polishing AND option of adding red side fire LEDS under the back edge of the plate for either parking or brake lights. The old post has pics of the SS plate and I will post new pics up once I have them. These are held on with 3M double sided tape just like the stock plastic pads.

My paypal is kdhwiz@aol.com

Cost is $150 for bare machined plate and you finish yourself - paint or powdecoat or....

$200 for powder coated only

$215 for powder coated and polished

Add LED lights is $5

Shipping starts at $13.xx and UP... Fed Ex Insurance is recommended.
Canada shipping will be higher
I have several Deposits now of $100 from people on Facebook, TBSSowners, etc

Todd Hajel
Jay Mildner
Ivan Valdez
Brian Knoeller
Dustin Johnson
Mike Tanner
Glen Rains
Matt McClelland
Bill DeBlasio
Randy Tilton
Mike Connelly
James DeGrazio
Charles Nichols
Mike Bissman

 

[Blckshdw]

Why do you need a second thread for this?

 

[Daniel644]

and can us newer guys get some pictures so we know what the heck you're talking about and what they look like? or atleast a link to the old thread for those of us that can't find it.

 

[Tiggerr]

Like to see pics with the LED's lit.

 

[dmanns67]

and can us newer guys get some pictures so we know what the heck you're talking about and what they look like? or atleast a link to the old thread for those of us that can't find it.

Search "bumper step plates". All over FB and TBSSowners as well. Similar to your plastic step plate on top of your rear bumper. His are billet aluminum and powder coated in your choice of color or you can get a blank and paint it yourself.

Also, he makes them without the "SS". They are blank with the ribs going the whole way across.