Crank Balancer Puller and Install tools

[BrownHP800]

Does anyone have a nice used set of tools to pull and install a balancer on our 4.2 engines? I need to replace the front seal on my son's 2002 Trailblazer. I hate to buy new tools for something I will probably only ever use once.

Thanks

 

[Mooseman]

Have a look at my timing chain tensioner replacement write up. It will explain if you need the special Spent-Moore tool depending if you have the first design balancet or not. Only if you have the first design you need the tool. Otherwise, a normal 3 jaw puller should work. I said should because mine was a b!tch to remove.

It's listed in the 4.2 FAQ.

 

[BrownHP800]

Thanks for the info. Yeah I have the first design so I need the tool

 

[Ric_Whit]

@BrownHP800
I have replace my 1st design for the 2nd design on my 2002 TB check my post.
https://gmtnation.com/forums/threads/replacing-crankshaft-front-seal-solved.17742/